The World's Only and The Most Convenient SMT Resistor Kits
These Super SMT Resistor Kits are of the world's only type that offer the most convenience for sorting, storing and obtaining SMT resistors in a short time, <1 second, with the high accuracy.
They are made by using our the world's only special container, Super SMT Component Enclosure™, which has 128 individually lidded compartments and enclosed by one lockable top cover. The foam pad under the top cover keeps all the small lids, so-called coverlets, closed when the top cover is closed and locked. Each coverlet measures 0.87" (L) x 0.59" (W) x 0.63"(D) or 22mm (L) x 15mm (W) x 16mm (D), a perfect size for storing and obtaining SMT components. The Super Kit Enclosure™ measures 11" (L) x 8.5" (W) x 1.75"(H) or 280mm (L) x 216mm (W) x 45mm (H), the same size as a letter size paper, and can easily be placed on the work benches or stored on book shelves.
All the surface mount resistors are pre-sorted and stored in Super SMT Component Enclosure™ with every resistor value being printed clearly on each lid.
These are the options when ordering the Super Surface Mount Resistor Kits™:
The Super SMT Resistor Kits™ can have 128 values/kit (use one enclosure), and 510 values/kit (use 4 enclosures), which include all the values specified by the E24 and E96 EIA Standards respectively. Our newly developed 510 value kits cover all the 510 values plus extended low end values, from 0 Ohm to 10 Ohm, and high end values, from 1M to 20M.
For each value, you have the choices of 50PC/value, 100PC/value, 200PC/value and 500PC/value.
This resistor kit can be used for setting the current of this laser driver
This resistor kit can be used for setting the set-point temperature of this TEC controller
This resistor kit can be used with this capacitor kit for setting the compensation network of the TEC controller